email is Fine . :) In Repeater-Builder@yahoogroups.com, "NĜATH" <[EMAIL PROTECTED]> wrote: > I'll offer a little help also - I'll send you the manual for the price > of the postage. > NĜATH / Dave > > ----- Original Message ----- > From: "Mike DeWaele" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Wednesday, April 21, 2004 7:12 PM > Subject: Re: [Repeater-Builder] VHF Engineering Repeater > > > I think I have a manual for that whole set up with the tune up > instructions. > If you want I'll see if I can dig it out and scan it for you. > > Mike KA2NDW > > > ----- Original Message ----- > From: kf4vgx <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Wednesday, April 21, 2004 7:49 PM > Subject: [Repeater-Builder] VHF Engineering Repeater > > > > This Repeater RX series receiver has four boards connecting together > > to complete the receiver AS 2 , FM 455 , IF 10.7 , RF 144. > > > > Having trouble with the receiver being to low ,so without the proper > > test equipment available to me ,I'm going to tune this the old > > fashion way . With an HT in the field by ear . My problem is I > > don't know which board is the main board for tuning the receive. I'm > > thinking its the FM 455. Question is there anyone in this group > > familiar with this receiver and tune up procedures ? VHF > Engineering > > Repeater 73 to the group > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > Yahoo! Groups Links
Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/