have the factory books but there main thing is to send it in for
replacement. the books I have show very little of one board info. do have
a service monitor ever got a new duplexer and preamp from TX RX no
change and since the repeater use in service before I think there is some
adjustments to make but I am thinking they are software type.
----- Original Message -----
From: "Virden Clark Beckman" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Saturday, April 24, 2004 10:44 AM
Subject: Re: [Repeater-Builder] Motorola MTR-2000 VHF
> What is the sensitivity in microvolts? If you do not have access to a
> signal generator or service monitor you will not get far on your own,
> having manuals is important for the radio service tech you consult with
> on-site to evaluate this problem.
>
> Maire Company wrote:
> >
> > well if know the freg is right just there is very little range on the
> > receive on the repeater. don't know is there is any alignment that can
be
> > done or if there is any squelch settings. I think they are all software
> > done.
> >
> > thanks
> >
> > ----- Original Message -----
> > From: "Virden Clark Beckman" <[EMAIL PROTECTED]>
> > To: <Repeater-Builder@yahoogroups.com>
> > Sent: Saturday, April 24, 2004 12:07 AM
> > Subject: Re: [Repeater-Builder] Motorola MTR-2000 VHF
> >
> > > Are you thinking of alignment, frequency adjustment or just plain
> > > squelch?
> > >
> > > > Maire Company wrote:
> > > >
> > > > does any one know if there are any adjustments on the receive of a
> > > > MTR-2000 VHF repeater, I have poor receive on the repeater but
killer
> > > > transmit.
> > >
> > > --
> > > 73...Clark Beckman N8PZD
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> --
> 73...Clark Beckman N8PZD
>
> Pursuant to U.S. Code, title 47, Chapter 5, Subchapter II, ß227,
> "Any and all nonsolicited commercial E-mail sent to this address
> is subject to a download and archival fee of $500.00 U.S.".
> E-mailing denotes acceptance of these terms.
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
