Ken,
Congratulations! I will file this tidbit of information away for future
use...
73, Eric Lemmon WB6FLY
Ken Arck wrote:
>
...I noticed the connection to the S0239 had apparently been resoldered
at some point in the past on the adjusted one... On the bad one, there
was so much solder that the solder fillet actually shorted almost 1/4
inch of the loop... I removed all the excess solder, and used just
enough for a good electrical and mechanical joint. It is now working
just fine!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
