<http://www.catauto.com/sq1000.html>
And thank you for the awesome article on the Mitrek.
Mike WA6ILQ wrote:
At 10:10 PM 6/1/04 -0400, you wrote:Any thoughts on the two squelch cards? I'm looking for the dual squelch action of the Micor squelch circuit.Thank you, Tom N8LBTNot familiar with the SQ-1000, but the LInk RLC-MOT uses the actual Micor chip. Schematic at <http://www.repeater-builder.com/pdf/rlc_mot_rev_c.pdf> I mention installing a RLC-MOT into a Mitrek in the article at <http://www.repeater-builder.com/mitrek/mitrek-interfacing.html>... I suggest that you read the ten or so paragraphs about the RLC-MOT... They start at "Notes on the Mitrek Carrier Squelch " The comment about adding a transistor behind the module just may save you $60. Mike WA6ILQ PS - So who makes the SQ-1000? Got a pointer? Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.