Hi Normally most of the zetrons have a default of, any dtmf key greater than 15 seconds will reset the basic problems.You may try this.
REgards Brad ZS5WT --- "John J. Riddell" <[EMAIL PROTECTED]> wrote: > My suggestion would be to get a telephone line > controller that will answer > an incoming call > at your site, then you can disable the repeater via > the phone line until > you can get access. > > A company called B&L Electronics in Ottawa, Ill > sells these devices. > > John VE3AMZ. > ----- Original Message ----- > From: "rtoplus" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Thursday, June 10, 2004 3:01 AM > Subject: [Repeater-Builder] stuck repeater > > > | Greetings from NC at 2:45AM > | > | After arising at about 2:00 AM for a nature call, > I noticed on my > | scanner, an un-modulated signal. I turned on the > lights in the > | house to check the channel on the scanner. > Damnit, it's my 2 meter > | repeater! I don't know how long its been keyed up > cause I've been > | sleeping (not anymore tonight). I attempted to > disable the > | controler (zetron model 37) and got all the right > response codes but > | the repeater is still chugging right along. It > has a 3 minute > | timeout timer set on the controller and the morse > ID is set for 10 > | minutes. Its been about 45 minutes since I've > been up and no ID and > | no timeout. I'm not sure if the repeater > (msr2000) has the stock > | timeout timer card still installed or not, I can't > remember. There > | is nothing I can do at this hour as the repeater > is a business > | rooftop installation with no access until 10:00AM. > My thoughts are > | that my controller went south cause I can key the > repeater and hear > | the courtesy beep when I unkey but I still get no > morse ID and also > | I also totally reset the controller to the factory > defaults and the > | repeater still stays keyed. I'm surprised my PA > hasn't burned up > | yet...intermittant duty set at about 55 watts. > Any thoughts from > | you folks at what other things I might look for in > the AM? > | > | > | Thanks a bunch > | > | Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892 > > John J. Riddell, VE3AMZ > 451 Cedarcliffe Dr., > Waterloo, Ontario, Canada > N2K 2J1 __________________________________ Do you Yahoo!? Friends. Fun. Try the all-new Yahoo! Messenger. http://messenger.yahoo.com/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/