You should try to keep impedances matched and have a little isolation too. A Wilkinson splitter is simple and effective. Get yourself some 75 ohm coax, cut it to a quarter wave with velocity factor considered. Also get a 100 ohm carbon comp resistor and some coax jacks of your choice. I like bnc's.
A pretty good background on Wilkinsons is here... http://www.microwaves101.com/encyclopedia/Wilkinson_splitters.cfm If you pay attention to the dimentions you will have pretty close to perfection at much less than the cost of a mini circuits. But go with mini circuits if you have the budget. td wb6mie Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/