--- In Repeater-Builder@yahoogroups.com, "Jim B." <[EMAIL PROTECTED]> wrote:
> There should not be a significantly noticable difference between 
high 
> and low tones. If the TS-64 is slow to open (> 250mS), either you 
have 
> it tapped wrong (which is nearly impossible on a Micor), the 
encode tone 
> is poor, or the decoder is malfunctioning.

The problem occurs with all users so I doubt it's an encoder issue.  
The tone is 100.0 hz.  I've never had a PL decoder on this 
particular box before, it use to be a packet repeater.

> 
> Steve Grantham wrote:
> 
> > I don't know very much about the Micor stuff.  Used to work on 
the
> > occasional Micor unit on the bench in the GE shop some 25 years 
ago..  I
> > like to use the other stuff..  Anyway..  Did you change to a 
lower frequency
> > PL tone?  Remember, it takes longer for the decoder to recognize 
the longer
> > sine-wave.  Frequency & time..  If you want faster, try a higher 
frequency
> > tone.  (Seems like 203.5 Hz is about three times 67 Hz, and it 
should decode
> > in about a third of the time.)
> > 
> > 73,
> > Steve AA5SG
> > 
> > ----- Original Message ----- 
> > From: "wb6ymh" <[EMAIL PROTECTED]>
> > To: <Repeater-Builder@yahoogroups.com>
> > Sent: Wednesday, September 08, 2004 9:18 AM
> > Subject: [Repeater-Builder] ts 64 pickup time?
> > 
> > 
> > 
> >>I've recently added a ts64 to a 2 meter Micor repeater and have
> >>noticed that the PL decode time is noticeable, probably between 
1/4
> >>and 1/2 second.  I'm use to Motorola PL decoders that have no
> >>noticeable pickup time. The ts64 decode seems to be solid with no
> >>problems talking it off.  The input is right off the Micor's
> >>discriminator.  Is this normal or do I have a problem?  It's
> >>certainly an effective kurchunk filter!
> >>
> >>73's Skip WB6YMH
> >>
> 
> -- 
> Jim Barbour
> WD8CHL





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to