That way I don't have to do any major mods to the voter. I prefer to run it the way it was intended.
Jamey Wright -----Original Message----- From: John Sichert [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 14, 2004 7:25 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Voters Jamey, If you did read through that thread, why would you still be using status tone to indicate a COR signal? John At 08:13 PM 9/14/04, you wrote: >A while back, there was some discussion on voters. I have read through all >of that. I am looking to install one here. I am planning on bringing my rx >sites back on RF and having the rx radios at the voter site interface to a >status tone (2175 Hz) circuit and then feed the voter. My question is: >Does anyone have a circuit to generate the status tones or know of a >reasonably priced commercially available product. I just don't want to >re-invent the wheel if someone else has already dealt w/ this. > >Jamey Wright >KD4SIY > > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/