How about inserting the Micor PL decoder circuit board as the
manufacturer had intended? If you don't have that board, I have a
couple here ...
Neil - WA6KLA
[EMAIL PROTECTED] wrote:
>
> Also found TS32 to be very slow so I replaced it with a TS64 and found no
> appreciable difference in keyup speed on my Canadian Micor mobile repeater.
> Microphone bias resistor is removed. Nearly half second keyup lag. Must be the
> slowest repeater in town. How can other repeaters be so responsive and
> Com-Spec
> stuff so slow? Even a home made repeater using a TS32 has slow key up.
> Sometimes users first word is completely clipped. There might be a new and
> old model
> TS32 both are slow. Am I missing something?
> Gary K2UQ
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
