It just reads it out, there should be no change.
Duane
----- Original Message -----
From: "Ken Arck" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Saturday, October 23, 2004 5:23 PM
Subject: [Repeater-Builder] Doug Hall RBI-1 question
>
> When one does a reset on an RBI-1, does it actually set the controlled
> radio to a known freq or does the RBI-1 simply read the current contents,
> in order to sync?
>
> In other words, let's say the controlled radio is currently set to
146.520.
> Is that where it is left after the re-sync?
>
> Ken
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
