----- Original Message ----- From: "David" <[EMAIL PROTECTED]>
> > yes that diode is missing on my board there is a jumper right next to where > the diode goes but nothing tells me to do anything with the jumper. > Forget about the jumper. The RC210 needs .5 to 2.5 volts of audio, I don't think you're getting near that much where you're connected. The connection you're using is directly from the discriminator. Try getting the audio connection through a .1 uF Mylar capacitor to J2-14 (where you put the jumper to J2-6). Gerald Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/