Yep,
A specific callsign and operational changes are noted using the book information. The changes are programmed into an eprom, which plugs into the socket adjacent to the factory eprom/firmware. I will program the eprom (for free) if you supply the chip, the program information and a prepaid SASE Mailer with proper postage. Email me direct if you have questions. There are three different manuals for the ITC-32, depending on vintage. One or two are quite complete, the remainders are minimal get started instructions. I've alread shared some of the firmware "tweaks" made by Hams running ITC-32 controllers for years. If you're serious about running the ITC-32, I might be coaxed to again provide that information free. cheers skipp skipp025 at yahoo.com > Q <[EMAIL PROTECTED]> wrote: > Anyone familiar with this old controller? I need to press it into > service and change callsign and ect. I downloaded the pdf files already. > Thanks in advance and Seasons Greetings,73,Lee,N3APP Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/