Eric,
thank You for very accurate information, this is what I suspected. My
harness is 323mm (~12.72 inches) between adjacent connectors so
this is clearly a high-split duplexer. Do You (or anyone else) know
where I could obtain a proper harness (Sinclar Canada/USA direct or
a distributor)?
73, Per Molund LA9XKA
At 03:27 08.01.2005, you wrote:
>If the distance between the centers of any two adjacent tee connectors
>is about 12.75 inches, you have the 148-174 MHz version. If the
>distance is close to 14 inches, you have the 132-150 MHz version. Both
>versions have the same physical dimensions and the same coupling loop
>assemblies; the harness is the only difference. The loops must be
>adjusted if the harness is changed.
>
>You cannot achieve the Sinclair specifications in the 2m band by simply
>re-tuning a high-split duplexer; you must use the longer harness, which
>can be purchased for about $120. Although rather heavy and somewhat
>cumbersome, the six-cavity Q2330E is an impressive performer when
>equipped with the proper harness and carefully tuned.
>
>73, Eric Lemmon WB6FLY
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
