|
Hello Skipp, I am here in Tijuana, just across the border with
San Ysidro, Ca.
Good it works for you. 73.....
Juan
----- Original Message -----
Sent: Tuesday, January 11, 2005 8:31
AM
Subject: [Repeater-Builder] Re: TKR820
(tkr-720) CORlogic(pin13)informationwanted.
Just what the doctor ordered. Thanks Juan.
Su
respuesta trabajada muy bien. ¿Qué estado
usted vivo adentro? Tengo
familia en GTO, MX
Gracias otra vez mucho.
skipp
>
XE2SI <[EMAIL PROTECTED]...> wrote:
> Looks
that you have an old repeater, the new ones
> have that pin called TOR
wich is what you want,
> if this is the case there is a small square
island in the
> controller board near the IC11 ( pin 9 ), this
>
change state when there is a valid "PL" received,
> maybe you will need
a buffer for what you need.
> hope this helps.
>
Juan
> ----- Original Message -----
>
From: skipp025
> To: Repeater-Builder@yahoogroups.com
> Sent: Monday, January 10, 2005 6:27
PM
> Subject: [Repeater-Builder] TKR820 (tkr-720) COR logic
(pin
> 13)informationwanted.
>
>
Hello there,
>
> Anyone have information to
configure the COR output
> logic on the Kenwood TKR820
Repeater to ctcss only?
> I'd like to make pin 13 (COR) of
the accessory
> connector change states with a valid
received ctcss
> tone.
>
> As
received, accessory pin 13 (COR) changes state
> with
carrier squelch activity. This tidbit of knowledge
> seems
to be a rather elusive animal. Maybe one of you
> has done
this already?
>
> Thanks in advance for your
reply.
>
> cheers,
>
>
skipp
> skipp025 at yahoo.com
Yahoo! Groups Links
<*>
To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*>
To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*>
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
|
