I had a R100 that did the same thing. Turned out to be a leaky "and" gate-
the hang timer cap had to charge before tx would begin. Hope that helps.
Will, KC4YBZ
In a message dated 1/15/2005 11:51:24 AM Central Standard Time,
[EMAIL PROTECTED] writes:
I'm looking to see if any one on the list that runs an MSF 5000 has
experienced this problem. When I key up this VHF MSF and start counting,
the repeater doesn't key up and start retransmitting untill I get to
four. So there is about a good two second delay to repeater key
up. When I hook up the test set the receive audio comes out the local
speaker with no delay. The repeater keys up instantly with the local PTT
switch. If the repeater is still keyed up during the hang time and you
key back up again the audio comes through with no delay. As soon as you
let the hang time expire it takes two full seconds of an incoming signal to
get it to key up again. I've gone through all the delay setting in the
RSS and set them to zero. I also tried setting everything back to
default, and neither of these actions made any difference. If anyone has
any ideas on what this could be I would very much appreciate it.
Thanks, T.J.
73
Yahoo! Groups Links
|