I searched through 10,000 posts and did not see this as a topic, so
perhaps it is safe to ask?
While building out my repeater empire, I discovered that an Astron RM-
35 does not like providing 30 amps continuous :) So, I thought I
would run the latest repeater on a separate power supply. However,
the controller, an Arcom RC-210, would not recognize COS and PTT
states of the repeater on a separate power supply. What is the
correct procedure to tie these two power supplies together, to
either: A. Provide more than 30 amps continuous together, or B. have
the ground of the second power supply recognized by the controller,
which is running on the first power supply?
The repeaters are 1100 feet up a tower, in a very cramped space, so I
thought I would ask here before experimenting. Thank you!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
