'Tis one of the reasons I prefer to order by written letter.
Neil - WA6KLA Coy Hilton wrote: > > I ordered 7 crystals from Bomar in December on the phone. When I > received the order they had gotten a repeater pair reversed IE the > pair was for a link radio on a repeater, what I actually got was the > crystals for the repeater frequency, the Tx and Rx frequencies were > reversed. When I called they said that I had made the mistake and > that they would be glad to make the crystals that I needed for 10 > bucks each. SAY WHAT? SO BOMAR is on my nasty list. Great customer > no service!! > > --- In Repeater-Builder@yahoogroups.com, "Maire Company" > <[EMAIL PROTECTED]> wrote: > > At one time I had ICM make me some for Motorola HT-210 and HT-90. > They > > worked ok in Florida but when we took them to Gatlinburg TN in > winter almost > > all the radio's had problems of being off Freg. never ordered > from them > > again. Been using Bomar for many years for repeaters and HT-500 > and GE > > mobiles with no problems. > > > > that is my 2 cents. John > > > > > > ----- Original Message ----- > > From: "Bob Dengler" <[EMAIL PROTECTED]> > > To: <Repeater-Builder@yahoogroups.com> > > Sent: Monday, February 07, 2005 7:06 PM > > Subject: Re: [Repeater-Builder] Mastr II Rx Freq Drift > > > > > > > > > > At 2/7/2005 12:19 PM, you wrote: > > > > > >>I recently rebuilt my 440 repeater and got away from the Mastr > II mobile > > >>w/ tripler PA and went to a Mastr II Station. As a part of the > upgrade, I > > >>sent a set of 2C icoms to International Crystal and had them > recrystaled > > >>to my frequency. It has been on the air since the end of > December. When > > >>I first put in on, everything was great. After about 2 weeks, I > couldn t > > >>get into it anymore. After some experimenting, I found that if > I tuned > > >>down from 449.325 (rx freq) to 449.310 I could bring it up. > Went back to > > >>the site with the service monitor and put it back on frequency. > That was > > >>3 weeks ago. A few days ago, can t bring up the repeater. I > tried at > > >>449.320. Bingo! There it is. > > >> > > >> > > >> > > >>My question& Is it normal for a crystal to drift that much > over the > > >>first month or so? I don t remember having this problem before > but it s > > >>been a while. No, the building is not climate controlled but is > insulated > > >>very well and the temperatures have been pretty mild around here > lately. > > > > > > Although crystals do age a very small amount, it's not normal > for it to > > > move this much. Sounds like some contamination got inside the > can. > > > > > > For as much as ICM charges for crystals these days, you should > have no > > > problem getting a replacement from them at no charge. > > > > > > Bob NO6B > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/