Mathew, we are completing the same project for my UHF system as well. Your main should be port 1 on the RVS-8 and the voting rec at the main site should go to port 2 and port 3 depending on how many aux rec sites you have. The output of the RVS-8 controller will go your main controller. My partner is matching the audio levels of a Micor rec with 3 spectra radios. So far its pretty close match. I ll advise next week when I put the system in service. I hope I understood your question and I answered it proper. 73 Rich/N2ROW
>>> [EMAIL PROTECTED] 2/10/05 7:25:54 AM >>> I'm getting ready to hook up and RVS-8 Voter system to the repeater, and am having an issue with the main receiver. Here's what's going to happen. THe main receiver is a Master II ER41. I am going to use Kenwood TM-V7's for the remote receiver's, but I am unclear as how to get the main receiver hooked up, as it will have a different audio response than the Kenwood's. I've not begun to hook it up as of yet, but in my mind I am just not able to put it together for some reason, but then I don't always get to think as clear as I want to. I'm just at a lost on this one. Anyone have any expierience with hooking one up. I know how to interface the rest of the voter system, just not sure about that main receiver. Thanks. Mathew Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/