At 2/10/2005 11:58 AM, you wrote:
>I'd like to know more about what you are doing
>
> I have a MCL mixer and attempted the same thing, but
>using a cell phone in test mode (848.25MHz) as the LO
>and a video modulator that outputs on channel 3
>(61.75MHz?)for the IF. This was to achieve a 910MHz RF
>out from the mixer.
>
> It didn't work and I wonder if I was putting too much
>power into the mixer from the cell phone - but I am
>not sure because the cell phone turned off after I
>connected the phone to the mixer and turned on the
>transmitter... perhaps I need and attenuator pad of
>3dB or better...
>
>
>~Ben, KB9LFZ
Standard LO drive levels for Mini Circuits mixers is +7 to +13 dBm, though
they do make units that take up to +27 dBm!
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
