If my life was dependent on it and it was make shift or nothing I will go with make shift any day! I Have built emergency repeaters from HTs before. In an emergency You cant wait for the slow moving dog response of a chief, a city manager ect. to order you a repeater, and a manufacturer to build it and to get it shipped by turtle back express. You have to have something NOW! I was involved with public safety communications for over ten years. I've seen Police departments go totaly with out communications in a matter of minutes. It's a spooky situation to be in, not to mention how it feels for the Police Officer. In this day and time they can't be with out communications for more than a few seconds. Just think how much NEXTEL is going to pay to fix the situation that they're in with public safety communications.
--- In Repeater-Builder@yahoogroups.com, Eric Lemmon <[EMAIL PROTECTED]> wrote: > Denny, > > The R1225 is just the full-duplex transceiver that is in a GR1225 or > RKR1225 repeater cabinet. It is exactly the same size as a Maxtrac or > GM300 dash-mount mobile radio. Since it has a built-in controller, all > you need is a duplexer and the connecting cables and you have a tactical > repeater. I have done this, and it works very well. There are many > issues to consider when creating a full-duplex repeater from two simplex > handheld radios, and I don't think you should pursue such a solution- > especially since this is intended to be used where people's lives may be > at risk. A PAC-RT is not appropriate for this application. > > 73, Eric Lemmon WB6FLY > > Denny wrote: > > > > Thanks for the input. It is 150MHz and we would have a 5Mhz split. > > What is the best process for shielding the two radios? Are there > > cases out there or some foil type products? What would happen if we > > just connected to the two radios together and separated the antennas? > > > > I looked at the R1225 and it is a little big but may work if need > > be. Would a Motorola PAC RT work? > > > > Denny > > > > --- In Repeater-Builder@yahoogroups.com, Eric Lemmon <[EMAIL PROTECTED]> > > wrote: > > > Denny, > > > > > > The HT1000 is an excellent radio by itself, but its plastic case > > offers > > > no shielding whatsoever. It is possible to construct a compact low > > > power repeater with the HT1000 (or any two commercial quality > > portable > > > radios) if each radio is enclosed in a tightly-shielded box, with > > all > > > audio and control leads brought out through coaxial filter > > capacitor > > > terminals. The antenna lead would need to be brought out through a > > > separate bulkhead connector. > > > > > > Once you have a completely shielded transmitter and a completely > > > shielded receiver, connect them to a compact (mobile) duplexer with > > > double-shielded cable such as RG-400/U. You will need a > > rudimentary > > > controller to handle the simple repeater functions. I am assuming > > that > > > the pair you intend to use in the 150 MHz VHF band has a 5 MHz > > split; if > > > it is less, a mobile duplexer won't work. > > > > > > It would be a lot easier to use a 10 watt Motorola R1225 repeater > > > transceiver, instead of two separate radios. > > > > > > 73, Eric Lemmon WB6FLY > > > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/