Gerald,
You are correct on the UHF modules, they are 50 ohms in and out and
won't need modified. Not the case however in VHF and other bands...
Kevin Custer
Gerald Pelnar wrote:
>Neil,
>
>I was looking at some UHF micor mobiles a while back with this in mind. You
>shouldn't have to cut the boards. The 75 and 100 watt boards don't look to
>difficult to remove. Just pull the entire final. The driver boards are
>separate and already 50 ohm. The driver for the 75 is the same board used in
>the 25 watt model and the driver for the 100 watt is the same as the 45 watt
>model. I'm gonna try it. I need a couple of 25 watt link transceivers.
>
>Gerald
>
>
>
>> Kevin,
>>
>> Have you or anyone else figured out where to cut a Micor PA board
>> and modify for a 50 ohm output what is remaining to be able to use
>> the same board but at a lower power?
>>
>> Ie: take a 100 watt PA Board, cut off the 4 transistor finals and
>> use the driver stage?
>>
>> Neil - WA6KLA
>>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
