I'm at the office now and don't have access to
model numbers. I can tell you that the ones I need will be installed in the
"Coded Squelch" module of the Micor Spectra Tac Receiver. If I'm not
mistaken, there were two different sizes that would work, one being much larger
than the other.
Thanks!
Adam N2ACF
----- Original Message -----
Sent: Monday, March 07, 2005 12:29
AM
Subject: Re: [Repeater-Builder]
Vibrasponders - 114.8
At 05:51 PM 3/6/05, you wrote:
Hello
All, I'm in need of several
Vibrasponders on 114.8. If anyone has a few that they would like
to sell or trade for some other freqs, I would greatly appreciate
it. Thanks! Adam
N2ACF [EMAIL PROTECTED] Adam,
saying that "I'm in need of a Vibrasponder" is like saying "I'm in need of
a car". In my personal collection (which is maybe 1/20 that of
Neil), I have at least ten different styles of Vibrasponders.
You
need to post the type of radio (Micor, Mitrek, etc), the radio model
number, and preferably the number on the PL decoder board.
Why the
model number? because in many cases the reed numbers changed
mid-life on the radio... for example, early Motracs used a very different
reed than late Motracs.
Why the PL board number? because
different boards used different reeds: the HLN4020 board used a very
different 'sponder than the HLN4181 board - and both were used in
Mitreks interchangeably.
Mike WA6ILQ
Yahoo! Groups Links
|