John Everson wrote:
>
> --- In Repeater-Builder@yahoogroups.com, "Rick & Charlotte"
> <[EMAIL PROTECTED]> wrote:
>
>>I am running one of these amps right now
>>
>>with around 100mw drive I am getting around 55 watts at 224.420
>>
>>stable output with no spurs
>>
>>I did not need to do a lot of mods at this point I use the
>
> controller to
>
>>run the PTT on the amp as there is no RF switch to do this funtion
>>on the amp itself .. I have ordered a rack for this amp and willsee
>>what in it to this job .. I will post more info as I move forward
>
> in this
>
>>project
>>
>>Rick
>>
>>
>
> Right On Rick,
>
> It's good to hear that you have the amp up and running. Nice that you
> were able to do what I was never able to get around to. 55 watts with
> 100 Mw drive.... Awesome.
>
> 73 de John AB6LI
Sounds like a good match for a converted Micor....hmmm...
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
