what do you guys know about the installation
of radiating cable for a repeater in a building. I have a 5 story building
and sub basement. So it is like 6 stories. Thinking of putting the
repeater in the lower level and installing the cable up to the
roof. On the roof thinking a DB-408. (or would a dummy
load be used) This would be a UHF repeater possible 2 watts or other
low power use. The goal is to cover the floors as there are a lot of
cement and metal. At this time they have a repeater on the roof but the
lower floors are dead and there is very little receive in the sub
basement. The current repeater is 40 watts. No preamp.
Or any other thoughts would
help.
John
Yahoo! Groups Links
|
- Re: [Repeater-Builder] cable run radiating cable Maire Company
- Re: [Repeater-Builder] cable run radiating cable russ
- Re: [Repeater-Builder] cable run radiating cable Frank or Barb
- Re: [Repeater-Builder] cable run radiating cable rs . gilmore
- Re: [Repeater-Builder] cable run radiating cab... Joe
- Re: [Repeater-Builder] cable run radiating... Mike Morris WA6ILQ
- Re: [Repeater-Builder] cable run radiating cable Bob Dengler
- Re: [Repeater-Builder] cable run radiating cable Mike Morris WA6ILQ
- Re: [Repeater-Builder] cable run radiating cable Eric Lemmon