Tedd,
That fixed it, Wonder what caused that to happen.. Thaks again..
----- Original Message -----
From: "Tedd Doda" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Wednesday, March 23, 2005 4:05 PM
Subject: Re: [Repeater-Builder] GE mastr II UHF and rc-210
>
> On Wed, 23 Mar 2005 14:32:08 -0600, Brent wrote:
>
> >All the sudden last night at about 11:30 it went to ID and all there was,
is
> >white noise. no voice can pass thru.
>
> Funny, my 210 did the same thing a couple weeks ago, but I could
> just make out someones audio coming through with the noise.
>
> Unlock the controller and send the reset command (*21999)
> and see if that helps. Using a Mastr II UHF on port one,
> a 6 meter Mastr II on port 2, and a Phoenix link radio
> on port three. I was only getting the "white/pink" noise
> on port one.
>
> It never happened again, so I've never bothered Ken about it.
>
>
>
> Tedd Doda, VE3TJD
>
> Lazer Audio and Electronics
> Baden, Ontario, Canada
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ---
> [This E-mail scanned for viruses at TNWEB LLC]
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
---
[This E-mail scanned for viruses at TNWEB LLC]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
