Check the volume and squelch controls. They are very failure prone and can
go bad quickly. Check the position of the push button switches, it sounds
like the PL may be on. The volume and squelch controls push in and out,
when the squelch control is in, there is a trim pot on the back of the
control that sets the squelch, and the audio control is muted.
Jack
K6YC
----- Original Message -----
From: "w9mwq" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Friday, April 01, 2005 7:44 PM
Subject: [Repeater-Builder] Standard RP70U Help or Manual
>
>
> Need either a service manual on this or someone able to help me with
> it. I was told that it worked before it was shipped, when I got it,
> it had some damage to the front of the radio, I see nothing broken
> inside, but it has no audio, transmit, or receiver sensitivity. You
> can hear a slight audio from the speaker, and that is about it.
>
> Mathew
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
