Dennis, You have classic third-order intermodulation interference. 146.970 times 2 = 293.940 MHz. Subtract the 146.700 signal and you have 293.940 - 146.700 = 147.240 MHz, the output of your linked repeater. Other mixing products are possible. I suspect that neither the 146.970 repeater nor the 146.700 repeater has a circulator on the output. Bandpass cavities on the output are another option.
73, Eric Lemmon WB6FLY ki5fw wrote: > Hey Guys; > Why does my 146.970/Rptr when linked to a 147.240/Rptr get interference > from a 146.700/Rptr. The 146.700/R is about 5-7 miles from my > 146.970/R. When the link is up and someone uses the 146.700/R it > creates terrible interference and you can actually understand what is > being said on the 70/R. > The 70/R will not be heard or cause a problem until the 97/R is > accessed while linked to the 147.24/R. There is no problems when the > link is down. > Will a notch filter on the remote base T/cvr to notch out 146.700 be > the cure? The remote base is frequency agile and wonder if the notch > filter is the way to go. Guess it depends on how wide and deep the > notch is??? > I tried the intermod Calculator and I think I see what the problem is, > but not sure if I'm looking at it correctly. > > TNX in Advance, > Dennis ki5fw > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/