Joe, The wall mount book "LBI-31453D" says to refer to the "mobile" book which is a Rangr 403-512 MHZ book, LBI-38181 if that helps.
Like I said, just hoping this would work as a temporary repeater to get me by till I can get the crystals ordered for some Mastr II equipment I have. Thanks, Paul -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of mch Sent: Saturday, April 16, 2005 9:39 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] GE Delta/Ranger Wall mount I just re-read your original post. I assumed it was a RANGR you had. Is it a DELTA-S or DELTA-SX? If it's a plain DELTA, those are crystal and can be converted to a repeater, but the duty cycle still isn't adequate for repeater use. Joe M. mch wrote: > > And why not? No need for two synthesizers in a mobile. In fact, I can't > say I know of any mobiles that use two. The base station may be 20% with > the fan. I'm pretty sure the mobile is 5% (no fan). > > Joe M. > > Paul Finch wrote: > > > > Joe, > > > > Found the book, there were two of them. One says 14% and the other says 20% > > duty cycle. I looked in the schematics and sure enough it has only one > > synthesizer. Would be nice if there was two, guess GE saved a dollar or two > > on the cost. > > > > Paul > > > > -----Original Message----- > > From: Repeater-Builder@yahoogroups.com > > [mailto:[EMAIL PROTECTED] Behalf Of mch > > Sent: Saturday, April 16, 2005 8:33 PM > > To: Repeater-Builder@yahoogroups.com > > Subject: Re: [Repeater-Builder] GE Delta/Ranger Wall mount > > > > Paul Finch wrote: > > > > > > Is this radio synthesized? > > > > Yes > > > > > How hard it is to come up with programming facilities? > > > > It's fairly common. > > > > > Is it able to be duplexed? > > > > No > > > > > Is it worth it? > > > > Not as a repeater. The duty cycle is only 5%. > > > > Joe M. > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/