Wonder if anyone has a simple diagram to build a small circuit from 5
volts to about 8 volts. Was told I could use an opto isolator, but am
not familiar with them. I'm getting ready to interface the Kenwood TM-
V7 radios to the RVS-8 voter, am told it needs at least 8 volts to run
it. The TM-V7a I know has 5 volts out of the packet controller
connection. I will also need to take a 3 volt up to 8 volts from my
GE receiver. Any suggestions. Thanks.
Mathew
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
