Thanks. I must have been brain dead today. I forgot that the RX has
3 ranges. Set it up for the other range and retuned the VCO/front
end. Works fine.
Joel
--- In Repeater-Builder@yahoogroups.com, "Maire-Radios" <maire-
[EMAIL PROTECTED]> wrote:
> well the TKR-740K should do 146 to 162
> K2 should do 158 to 174
> K3 should do 136 to 150
> all above are RX
>
> all do TX 136 TO 174
>
>
> John all above out of service manual
>
>
> ----- Original Message -----
> From: "kg6kjd" <[EMAIL PROTECTED]>
> To: <Repeater-Builder@yahoogroups.com>
> Sent: Friday, May 06, 2005 4:46 PM
> Subject: [Repeater-Builder] TKR-740 program question
>
>
> >I have a Kenwood TKR-740 that I would like to program up as a
backup
> > box. The transmit frequency goes in with no problem but the
receive
> > frequency rounds up to 146.000. Does anybody know if there is a
key
> > combination to enter a receive frequency below 146.000?
> >
> > Thank's for any help.
> >
> > Joel
> > KG6KJD
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
