Okay let me see if I have it. What you have is an exciter and a PA
(A transmitter only). A receiver from another base or mobile. No
system board. Okay, If you can't find a replacment receiver system
board, let me know, I'll help you with a work around. At least you
have the 10 V regulator in the shelf.
What you will need are molex connectors and pins. They can be had
from Newark Electronics. I have bought the board mounted connectors
like the system baords have (you really won't need these) and the
regulator ones for connecting to the receiver boards there.
Good Luck
73
AC0Y
--- In Repeater-Builder@yahoogroups.com, "Brent" <[EMAIL PROTECTED]> wrote:
> well I have acquired another Ge Repeater with out the receiver,
and I have a
> receiver but the repeater I acquired no only was missing just the
receiver
> but the actual whole tray, the complete fold out osc, sq/audio
board and
> system board..
> Oh no, no bad 10v reg card .. the control shelf is in tack and
great
> condition.. just need the system board that the receiver and the
rest of
> the cables connect to.
> thanks Coy
> ----- Original Message -----
> From: "Coy Hilton" <[EMAIL PROTECTED]>
> To: <Repeater-Builder@yahoogroups.com>
> Sent: Saturday, May 07, 2005 8:15 PM
> Subject: [Repeater-Builder] Re: system board GE MASTR II
>
>
> > Are you building a radio or, do you have a bad 10 Volt regulator?
> > There are work arounds if you can't find one.
> > Good luck Bret
> >
> > --- In Repeater-Builder@yahoogroups.com, "Brent" <[EMAIL PROTECTED]>
wrote:
> > > Anybody know where I can locate a system board for a Ge Mastr
II
> > repeater
> > > I think the numbers are as follows 19D417205P1 Rev 3
> > >
> > >
> > > Thanks
> > > Brent
> > >
> > >
> > >
> > > ---
> > > [This E-mail scanned for viruses at TNWEB LLC]
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> > ---
> > [This E-mail scanned for viruses at TNWEB LLC]
> >
> >
> >
>
>
> ---
> [This E-mail scanned for viruses at TNWEB LLC]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
