Dang, that ID-O-MATIC is so cool I ordered one on-the-spot! I have NO idea what I'll do with it, but that's beside the point!
-- de WM4B Mike Kathleen, GA 146.25/85 -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Gary Sent: Thursday, May 12, 2005 11:44 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: CWID Larry, You might want to check out the ID-O-MATIC that is sold by N0AXS. This little Kit will run you about $20 bucks and works like a champ! Look up N0AXS or ID-O-MATIC on your search engine and he has a website where you can get this kit and other really neat items for repeaters! I use this for an ID'er on one of my repeaters and it works as good as any of the $500 controllers that I have! 73's and Happy Hamming Gary - W5GNB --- In Repeater-Builder@yahoogroups.com, Bob Dengler <[EMAIL PROTECTED]> wrote: > At 5/4/2005 06:26 AM, you wrote: > >Just was wondering what cwid is available new or used. I am in need of a > >cwid for one of my repeaters. I normally use the hamtronics diode matrix > >unit but they do not have them any more. I have a RPT10 on the air that > >needs some identification so if anyone knows of one for sale or has any > >ideas please let me know. > > > >Thanks in advance. > > > >WA0VUS > >Larry Kemper > >Muscatine, Iowa > > > ><mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED] > > Not the easiest way, but definitely the cheapest: use K1EL's K-ID PIC: $8 > shipped. The hard part is adding: > > -trigger & timing circuitry so it sends the ID every 10 minutes but only > while the repeater's in use > > -audio filter to clean up the square wave output. > > I've built a small interface board for my latest portapeater that uses the > K-ID chip. I'm not 100% happy with the result as I was space & time > constrained (had to fit within the multi-freq. area in the G.E. MVP & only > had a few weeks to design, build & test), but it does work. I can e-mail > you the schematic if you like & can even show you the result (will be > spending the Monday after Dayton in the Quad Cities area). > > Bob NO6B Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
