KB5ILY - Travis W. Burton wrote:
> Hi,
>
> I am working on an GE Phoenix SX that will be connected as Remote Base to
> my RC-100 from MCC.
>
>>From a packet related website I have located ground, PTT, RX & TX audio
> on P910 & P911 of the Phoenix, however am having trouble locating COS on
> either.
>
> Any assistance would be great.
>
> 73 de Travis KB5ILY
Pin 2 on J910, which is the same connector power is applied to. Pin
numbering starts AWAY from the center of the radio.
It's labeled RX Mute. It will follow how the radio is programmed for
that channel, either tone+COS or just COS. Also it's affected by the
hang-up box, so if a channel is programmed with CG, if you take the mic
off hook by grounding pin 9 on the same connector, it will be COS.
I think it's active high, but I could be wrong (50/50 chance ;c)
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
