Ideally the length would be measured from the "reference plane" of each connector. For a male N connector, I believe that would in fact be the tip of the connector.
Bob NO6B At 6/9/2005 10:10 PM, you wrote: >I've always understood it to be "connector tip to connector tip". > >------ Original Message ------ >Received: Thu, 09 Jun 2005 04:37:20 PM CDT >From: Dave VanHorn <[EMAIL PROTECTED]> > > I've always wondered about this, especially at VHF/UHF, how exactly > > you interpret when someone says you need an 11" cable, or a 1/4 wave > > cable, do you measure from the tips of the connectors, or where? > > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/