At 10:10 PM 6/17/2005, Mathew Quaife wrote:
>I need some input, not critisism or what I should do, as I know what
>to do.
I've seen this in a Kenwood VHF repeater.
The cause was the VCO having drifted quite a ways from where it was
originally calibrated.
The repeater was apparently mode-hopping between the two frequencies
at a high rate.
A slight readjustment to the VCO fixed it, and I added a coax stub
filter for pass on the repeater pair, and reject in the air band.
The FM audio slope detects on the aircraft gear just fine.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
