At 03:12 PM 6/21/2005, Bob Dengler wrote: >At 6/21/2005 12:46 PM, you wrote: > >At 12:21 PM 6/21/2005 -0700, you wrote: > > > > > > Always terminate the un-used port in a 50 ohm load. > > > ><---Of course but I'm a firm believe in using a pad on every port. It's the > >only way to guarantee a 50 ohm load on them. > > > >Ken > >How very true. I once tried to tune a (passive) filter using a sig. gen. & >Yaesu FT-8500; measured 1 dB of GAIN on the filter! A 10 dB pad on the >8500 fixed that measurement error.
That's no filter, that's an oscillator! :) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/