On Fri, 1 Jul 2005, n4rpd wrote:
> We are currently using a portable repeater made from 2 T73 SyntorX's
> wired into a ICS Linker IIa controller. The current to the PA for the
> TX is set down low to about 45W. It works really well, although we had
> to install a couple of 12V fans on the heat sinks to keep um cool.
> Advice or suggestions???
Turn the transmitter power up to 55W; those PAs are only spec'd to operate
at 55W - 100W.
Don't really know about the audio problem. I haven't worked too much with
X's in repeater setups.
--
Kris Kirby <[EMAIL PROTECTED]>
"BIG BROTHER IS WATCHING YOU!"
This message brought to you by the US Department of Homeland Security
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
