Hello MIke:
I am trying to use the controller in two repeaters , now we
have
them with one port controller and the two repeaters "in
paralell",
I have some of the outputs of the controller to turn one or
the other
off/on, If there is no easy way, think it will be going for
sale, it has
the autopatch, voice board, and manual; thanks
.
Juan, XE2SI
----- Original Message -----
Sent: Monday, July 18, 2005 1:42 PM
Subject: Re: [Repeater-Builder] 7K
controller
At 12:33 PM 7/18/05, you wrote:
>I asked this to the
S-Com site, but no answer yet, hope >somebody give some ligth here: I
have a S-Com 7K controller >with Version 2.03 ( think is the latest
firmware ),
Latest is 2.04
>my question >is if it can
handle two repeaters separated with their own timers >and ID's, can't
find anything related in the manual..... > >Thanks >Juan
XE2SI
Unfortunately no.
The 7K was designed as a single repeater
controller with an autopatch, a link (the second radio port), and a
control receiver/aux audio source. Like the 6K and the 5K it was
only intended to manage a single repeater.
A new model is in the
works (tentatively called the 7330) - it will be a true three port repeater
controller, with three touchtone decoders, three telemetry
generators (i.e courtesy beeps, etc), full crosspoint switching, and
the design is expandable to more ports. Each port can
be configured to be a repeater (i.e. full duplex with audio loopback), a
point-to-point link (full or half duplex with no audio loopback), a remote
base (half duplex, no loopback, and possibly frequency agility), or a
control receiver.
What are you trying to do? Let us know, there
may be a way to do it...
Mike
WA6ILQ
Yahoo! Groups Links
<*>
To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/
<*>
To unsubscribe from this group, send an email to: [EMAIL PROTECTED]
<*>
Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
YAHOO! GROUPS LINKS
|