Yeah, we made a 6 meter cavity out of some dryer ventalation hose. It had a beautiful notch right where it should be, until you walked around the room.
On 7/22/05, Kris Kirby <[EMAIL PROTECTED]> wrote: > On Fri, 22 Jul 2005, Dave VanHorn wrote: > > Copper pipe is probably workable, though expensive. > > onlinemetals.com -- 1' brass pipe, 6" diameter... $303! I'm starting to > think that copper sheet rolled into a cylinder would be a better idea. > > a 7" diameter duplexer is 22" in circumference. a 24" x 48" piece of > copper sheet would yield 7 duplexers at 440 MHz. At 18 GA, the width of > the material is 0.048". At 1MHz, the skin depth is 0.0026 in, and > decreases with frequency. 0.0135" is the smallest size that > onlinemetals.com stocks (which is 28 GA) and costs $71.15 in a 36" x 48" > sheet. > > Suddenly that $1K price tag on the used 6m duplexer doesn't look so bad. > > -- > Kris Kirby <[EMAIL PROTECTED]> > "BIG BROTHER IS WATCHING YOU!" > This message brought to you by the US Department of Homeland Security > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/