Wonder if anyone has done anything with the Cat 1000 to change the
volume level control inside the Cat1000B. I have a slight problem,
and need to reduce the volume even more than the pot will let me
inside of the controller. Problem that I have is, I set the rx
control for proper voltage, set the volume control for proper
deviation, set the audio out on the transmitter and I get everything
in order and the courtesy tones are still too loud. I have tried
several combinations and no luck.
My other problem is FANS. There is two of them on the amp, and they
make their way into the transmitter. In order to keep the fans out
of the transmitter, if I turn the audio out way down on the xmit,
the fan's are barely noticable, but then I have to crank up the
volume in the controller, thus making the courtesy tones and cw
tones way to loud. At present, both of the pots are down to the
bottom, and still to loud. Any ideas. Thanks
Mathew
N9LV
former W9MWQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
