Note: apologies if this is message ends up as a duplicate posting. Just sent the original over an hour ago and it still has not shown up on the listing. ======================
Hi Skipp, Thanks for your reply. At the moment we had to return to Caracas and left the system operating with just one traffic channel, plus the control channel. The customer said that at the moment usage will be very light, and only a single user group will be active. So not much operational impact for the moment, and since the system coverage is much more than the customer anticipated, at least in that respect they are very happy. We are planning to return in 2-3 weeks time, which we already had to do in order to bring the tower ground system up to snuff, as the present one is not so good. This tower was formerly in use by the cellular company, but has not been used for a few years now, and was basically abandoned by them. Since it is located inside our customer's property he indicated that he wanted us to use it, if viable. Preliminary observations indicated that the structure is in good shape, only the grounding system requires attention. Now that I've had some time to go through in my mind all the tests that we've done and the many good suggestions and information received, I've come up with a few possible strategies which I wanted to present to the persons that where kind enough to lend their help, so as to get some more opinions on which would be the most viable path to follow for a solution. In the next few hours I am going to compose a message that I will post on the group, so other readers can also benefit from whatever solution comes up, and also email a copy to other persons that are contributing towards hopefully finding the most appropriate solution. So far I am quite confident that the IM products are being generated in the RX path, probably even right in each receiver, but I will elaborate on my conclusions a bit later when I post said message. Thanks again for all your help. It is always very comforting to have knowledgeable people lend a hand in these cases where one is stranded in the middle of nowhere, and with this kind of problems. Also many thanks to everyone else that chipped in with suggestions and information. Be assured that I've read your messages and I will try to get back to all of you individually and reply to your postings -in the next few hours as time permits. I just don't wanted to send you a quick reply, but rather answer every posting in depth. Catch you all later. What a great group. Alex --- In Repeater-Builder@yahoogroups.com, "skipp025" <[EMAIL PROTECTED]> wrote: > No problem Alex, you should normal up the system > and route the output of tx 6 to another lower test > antenna through/from its respective combiner bp > cavity before the N-way box (& cap the unused box > port). Don't forget to disable the rx system preamp. > > **** > > I was an FTR for "big M Radio Company" Service > Stations for man years. > > One thing we all knew was how quick the sales folks > would sign off on a project that promissed the moon. > ... as long as the sales (and engineering) person got > paid or made the sale possible. After that it was > all finger pointing... > > The pain in the a$$ is when there are lots of > problems to point your fingers at. You probably have > more than one gator by the tail. If the numbers > don't score any direct imd or mix hits, you can > have better hope for a practical solution... > > cheers, > skipp Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/