Yep.. I have that document... but I am having one hell of a time locating the dipped micas of correct values... Digikey about 30% good, all common values... and Newark is the same... the oddball values are near impossible to locate.. ;-( mike
At 02:10 PM 11/14/2005 -0500, you wrote: >I agree with Chuck, and here is a GREAT source of 6M Micor information: ><http://www.sasquatchnet.org/kb6mip/tech.html> > >Kevin > >Chuck Kelsey wrote: > > >Don't count on it. You may still need to change a few caps. You'll know > >if you get a stage that won't peak. And by that, I mean you need to get > >to the peak and go past it, otherwise you are not really at the peak. > > > >Chuck > >WB2EDV > > > > > > > >Mike Perryman wrote: > > > > > >>I have a quick question, which may be a simple answer... > >> > >>I am converting a Micor Base-R/T to 6m repeater. The question pertains to > >>modifying the exciter and receiver.. I have located an exciter and > >>receiver in a machine that was tuned (with channel elements included) to > >>49MHz.. is this the correct split for a 6m machine so that no > modification > >>to exciter or receiver are required? > >> > >>I would really rather skip the mod process if this is the correct split. > >> > >>TIA, > >>mike > >> > > > > > >Yahoo! Groups Links > > > > --------------------------------------------------------------------- Mike Perryman Cavell, Mertz & Davis, Inc. [EMAIL PROTECTED] Consulting Engineers http://www.cmdconsulting.com 7839 Ashton Avenue K5JMP Manassas, VA 20109 USA (703) 392-9090; (703) 392-9559 fax; DC Line (202) 332-0110 --------------------------------------------------------------------- Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
