Hello Jeff: I thought I had an old comprod catalog, but can't find it. However, I did have an old 1974 vintage Prodelin catalog. It had their line of Spir 0 foam coaxial cable listed.
It did have listed in it a very similar 1/2" type cable with a VF of 81%. Perhaps they made this cable for com products or vice versa. The VF for the 75 and 50 ohm cable of this size and 3/8" and 7/8" were also the same. Again, if you want me to fax the page out of this catalog, let me know. I'll bet the VF is 81% on that vintage cable. During that era, they all competed with the same spec cable. Ciao, 73, Tony, K3WX Jeff DePolo WN3A wrote: > T > Thanks for the offer Tony. My friend has that same catalog which lacks a Vf > spec which is why I thought I'd try checking here. > > Does anyone remember if ComProd (before it became Phelps-Dodge) made coax? > That was before my time. Anyone have an old CommProd catalog? > > >>-----Original Message----- >>From: Repeater-Builder@yahoogroups.com >>[mailto:[EMAIL PROTECTED] On Behalf Of Tony Faiola >>Sent: Thursday, December 01, 2005 10:16 AM >>To: Repeater-Builder@yahoogroups.com >>Subject: Re: [Repeater-Builder] Looking for data on old heliax >> >> >> >> >>Jeff DePolo WN3A wrote: >> >>>Trying to help a friend locate some data on Phelps-Dodge >> >>FX-14-50 (or >> >>>FX-14-50H) cable, probably from the early or mid 70's. >> >>It's 1/4", aluminum >> >>>shield, jacketed cable. In particular he's looking for the >> >>velocity factor. >> >>>The cable is in use as buried sample lines in AM array, and >> >>he needs an >> >>>accurate Vf figure to locate a fault by TDR. Anyone have an old >>>Phelps-Dodge catalog on hand? >>> >>> --- Jeff >>> >>>-------------------------------------------- >>>Jeff DePolo WN3A - [EMAIL PROTECTED] >>>Broadcast and Communications Consultant >> >>Hello Jeff: >> >>I found a 1974 Phelps Dodge catalog in my library. It covers >>the 50 Ohm >>Aluminum Sheathed foamflex cables, FX12-50 and FX 12-50H, but >>nothing on >>the FX-14-50. >> >>Interesting thing is that the specs don't mention the VF, only >>dimensions, loss, etc. >> >>If you would like, send me your fax number, and I'll fax you >>the pages >>of the cables from the catalog. >> >>Ciao, 73, Tony, K3WX >> >> >> >> >> >> >> >> >>Yahoo! Groups Links >> >> >> >> >> >> > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/