Title: Message
In rereading the original post, the height is incorrect.  It should be 130 feet. 
----- Original Message -----
Sent: Friday, December 09, 2005 9:21 AM
Subject: Re: [Repeater-Builder] Need Advise: 6m Repeater Antenna

It is looking like it will be side mounted
----- Original Message -----
Sent: Friday, December 09, 2005 7:47 AM
Subject: RE: [Repeater-Builder] Need Advise: 6m Repeater Antenna

Will the antenna be top-mounted or side-mounted?
-----Original Message-----
From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Friday, December 09, 2005 7:17 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Need Advise: 6m Repeater Antenna

Hi All,
 
I will soon be putting up a 6m repeater. 
 
It is a Hamtronics REP-200 with  stock 20 Watt PA, using Wacom BrBp duplexer ordered for the repeater frequency.  Both Units were new in 1999, and have been stored since around 2001.  I have been slowly chasing all the gremlins out of the setup.  I have added a Storm Watch WX receiver on the aux receiver port, as well as a Midland Vehicular repeater unit (minus PA) in the cabinet to provide a wireless link for 2M Simplex input into the repeater. 
 
The antenna will be approximately 300 feet. 
 
I would like to get some suggestions for an antenna; based on the experiences of others.
 
Also, choice of Coax.
 
TIA,
 
David
KD4NUE
 
 








YAHOO! GROUPS LINKS




Reply via email to