I mean in emergency situation, like in natural disaster. What the minimal tools I have to have to be able to adjust the duplexer and how?
reza --- Kris Kirby <[EMAIL PROTECTED]> wrote: > On Thu, 22 Dec 2005, Reza PWW wrote: > > Can anybody can advise me for tunning duplexer > with minimum tools? For > > example case: I have to change TX-RX frequensi in > some place, where I > > only have SWR and some HT and volt meter? > > A case of beer, an SWR meter, and a radio. Tune for > minimum SWR. The case > of beer is to insure accuracy -- largely because > there isn't much. You're > tuning for minimum insertion loss at that point > (technically return loss). > > Really, you should find a friend with an IFR, > communications analyzer, or > spectrum analyzer with a tracking generator. To > properly do the job, you > need a dummy load on the unused port. Impedance > mismatches can also do a > job on cavity performance. > > -- > Kris Kirby, KE4AHR <[EMAIL PROTECTED]> > "BIG BROTHER IS WATCHING > YOU!" > This message brought to you by the US Department of > Homeland Security Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/