> skipp025 wrote:
> >I've done it... you really need to make and install
> >the status tone generators.
>
> What didn't you like about running it without the
> tone generators?
It was just a lot easier to use the tone generators
adapters. Plus we were using a comibination of original
method operation and local-distant located receivers
with the adapters. (it was a mixed system). The adapters
were pretty easy to build once you had the information.
> >If you really wanted to see the circuit, I might have a
> >copy in my files... but you might have to buy me a cup
> >of coffee at Dayton. :-) (light cream, no sugar). I'd
> Sure, I'll even buy you an ole hot dog or bratwurst.
No charge really... I'm pretty sure I know where the Cetec
Vega Circuit is, so I'll put it on my list of things to
scan and forward along.
> >Also know that Motorhead came out with a modificiation
> >to the Spectra Tac Current Generator Module, which improves
> >the vote performance quite a bit. I also have that paper-
> >work if you burn to have it.
> Yes, please.. It may be the same mod that Dan talked
> about (SRN-1068), but it would be interesting to see
> if they are the same mod.
> Thanks Skipp,
> Kevin
I know where that paperwork is, so I'll put it in the stack
of things to do. The update was related to running lots of
SQM (sig quality modules) units and the current generator
becomming unstable.
The fix was the addition of a small daughterboard, with an
updated current generator. If you're only running a few
modules in one shelf, you probably won't notice the problem.
If you're running more than one voter shelf, you should
think about the mod if the programmed type of operation
has hunting problems.
I'll work on getting that info to you... real world is early
next week as things work out.
skipp
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
