Perhaps we should note that Ian is talking about a radio service in
Australia. I doubt that discussions about standard repeater splits in the US
are particularly useful to him.
Al, K9SI
> ----- Original Message -----
> From: "Ian" <[EMAIL PROTECTED]>
> To: <Repeater-Builder@yahoogroups.com>
> Sent: Friday, January 27, 2006 8:23 AM
> Subject: [Repeater-Builder] RFS 6MC450S DIPLEXER
>
>
>> Hi guys .I have the above diplexer and have it tunned to 481.825 and
>> 487.025 and it works but if the repeater is tx for a while the weak
>> signal breaks down and crackles and after a while it comes back clear
>> and then breaks down.On my service monitor the notches show a reading
>> of -65db with 0 db signal on the tx and rx side.Any sugestions.Can it
>> be a problem with insertion loss .Thanks
>> Ian
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
