I assume one wavelength from center to center correct?
T.J. KC8LTS
Bob Dengler <[EMAIL PROTECTED]> wrote:
Bob Dengler <[EMAIL PROTECTED]> wrote:
At 2/7/2006 09:18 AM, you wrote:
>Does anyone know the formula for calculating the distance between two
>DB-252 corner reflectors that are connected by a phasing harness? I'm
>sure this is frequency dependent and I want to get the spacing correct.
>
I assume you're talking vertical separated corner reflectors aimed in the
same direction.
For maximum gain, 1 wavelength. You can reduce the spacing to ~0.8
wavelength to reduce nulls in the elevation pattern at the expense of
maximum gain, IOW the main lobe gets "fatter" but the on-horizon gain drops
a little.
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.