At 2/9/2006 10:37 AM, you wrote:
>Hi all,
>
>I figured that this may be just the spot to ask such a question.
>
>I am looking for a controller that can manage up to two full duplex
>ports as well as a port for remote control. It would need the option
>to be able to program the ports independently such that while the
>primary repeater port would have ID & Hang time, I would need to be
>able to disable both on a secondary.
>
>Also, it would need to have the ability to be managed via DTMF
>control over the secondary or other port.
>
>I've briefly looked at the LinkComm's the NHRC's, and the old ACC's
>but am not sure which would provide the best serivce for the cost.
>
>Any thoughts or is this really not the place for this?
I recommend the LinkComm RLC-1+. The NHRC-10 would be good too. ACC
controllers have not been manufactured for many years, so support would be
an issue.
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
