Well, I was finally able to get them ordered today... I had the guy at the county add me on to their account as a user for web browsing and ordering.
Also, FYI for all you guys (or youse guys, as it is usually pronounced here in Chicago) who prefer to just call Motorola - my guy called Motorola parts on the phone and they told him they preferred that he use the web site. Looks like they're trying to go away from the phone assist/ordering. SO if you're not set-up for online ordering yet, you might want to get it set-up now. And I'm not having any luck with the manual number I got regarding the R1011A power supply... Mark - N9WYS -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Monday, March 06, 2006 2:40 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Cable Well, it's only metering signals, and I'm pretty sure they're DC and filtered on the receiver, so shielding is just part of the overall effort to keep RF inside the chassis. I doubt it's critical unless you're using the receiver in a situation where any leakage of any kind could be picked up and intelligence gained from it (like inside the US Embassy in Russia). Worst case, you could wrap it in aluminum foil. I don't plan on using shielded wire for mine, just some plain #22 wires. Were you able to purchase the plugs from Motorola? Bob M. ====== --- N9WYS <[EMAIL PROTECTED]> wrote: > OK, thanks for the input, Bob. I actually measured > the cable I have, and it > measures about 7 1/4" overall... So 6 would have > been a bit short. > > I'm wondering just how critical the shielding is on > this particular cable? > I have multi-conductor cable available, but it is > unshielded. > > Mark - N9WYS > > -----Original Message----- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf > Of Bob M. > Sent: Monday, March 06, 2006 10:54 AM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] Cable > > You should make the cable 11-12 inches long, like > the > manual says. I made mine 6 inches before looking at > the manual or the chassis - way too short. Now I > have > to take it all apart and do it all over again. #22 > or > #24 stranded wire is fine. > > Bob M. > > > > > > > > Yahoo! Groups Links > > > [EMAIL PROTECTED] > > > > > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
